Copy(EDIT VERY WELL) JAMB Syllabus For Chemistry 2022/2023 PDF Download And Online

JAMB Chemistry syllabus 2022/2023: Are you looking for the latest official JAMB Syllabus For chemistry 2022/2023 pdf for download? If yes, then you are reading the right article.

In this article, you will find the official syllabus for JAMB chemistry 2022/2023 online and also the pdf.

JAMB chemistry syllabus 2022/2023, JAMB syllabus for all subjects 2022/2023, JAMB syllabus for chemistry 2022/2023, JAMB syllabus 2022 for chemistry, download Pdf JAMB chemistry Syllabus www.jamb.org.ng, JAMB chemistry syllabus topic, topics to study for JAMB chemistry 2022

jamb chemistry syllabus 2019 pdf download

The syllabus contains the list of topics you are required to cover during the course of preparing for JAMB. It also contains the list of recommended JAMB textbooks which I have already covered here.

If you want to pass JAMB, there are basically three materials you need:

  1. JAMB syllabus
  2. JAMB recommended textbooks
  3. JAMB past questions

In today’s article, we will be dealing with JAMB chemistry syllabus 2022 pdf download and online reading.

JAMB CHEMISTRY SYLLABUS 2022/2023 – TOPICS TO READ

1. Separation of mixtures and purification of chemical substances

Topics:

  • Pure and impure substances
  • Boiling and melting points.
  • Elements, compounds and mixtures
  • Chemical and physical changes.
  • Separation processes: evaporation, simple and fractional distillation, sublimation, filtration, crystallization, paper and column chromatography, simple and fractional crystallization, magnetization, decantation.

 

2. Chemical combination

Topics:

  • Stoichiometry
  • Laws of definite and multiple proportions, law of conservation of matter, Gay Lussac’s law of combining volumes.
  • Avogadro’s law; chemical symbols, formulae, equations and their uses, relative atomic mass based on 12C=12, the mole concept and Avogadro’s number.

 

3. Kinetic theory of matter and Gas Laws

Topics:

  • An outline of the kinetic theory of matter;

(i) melting,
(ii) vapourization
(iii) boiling
(iv) freezing
(v) condensation in terms of molecular motion and Brownian movement.

  • The laws of Boyle, Charles, Graham and Dalton (law of partial pressure); combined gas law, molar volume and atomicity of gases.
  • The ideal gas equation (PV = nrt).
  • The relationship between vapour density of gases and the relative molecular mass.

 

4. Atomic structure and bonding

Topics:

  • The concept of atoms, molecules and ions, the works of Dalton, Millikan, Rutherford, Moseley, Thompson and Bohr.

Atomic structure, electron configuration, atomic number, mass number and isotopes; specific examples should be drawn from elements of atomic number 1 to 20.
Shapes of s and p orbitals.

  • The periodic table and periodicity of elements, presentation of the periodic table with a view to recognizing families of elements e.g. Alkali metals, halogens, the noble gases and transition metals. The variation of the following properties: ionization energy, ionic radii, electron affinity and electronegativity.
  • Chemical bonding. Electrovalency and covalency, the electron configuration of elements and their tendency to attain the noble gas structure. Hydrogen bonding and metallic bonding as special types of electrovalency and covalency respectively; coordinate bond as a type of covalent bond as illustrated by complexes like [Fe(CN)6]3-, [Fe(CN)6]4-, [Cu(NH3)4]2+ and [Ag(NH3)2]+; van der Waals’ forces should be mentioned as a special type of bonding forces.
  • Shapes of simple molecules: linear ((H2, O2, Cl2,hcl and CO2), non-linear (H2O) and tetrahedral; (CH4) and pyramidal (NH3).
  • Nuclear Chemistry:

(i) Radioactivity – Types and properties of radiations
(ii) Nuclear reactions. Simple equations, uses and applications of natural and artificial radioactivity.

 

5. Air

Topics: 

  • The natural gaseous constituents and their proportion in the air.- nitrogen, oxygen, water vapour, carbon (IV) oxide and the noble gases (argon and neon).
  • Air as a mixture and some uses of the noble gas.

 

6. Water

Topics: 

  • Water as a product of the combustion of hydrogen and its composition by volume.
  • Water as a solvent, atmospheric gases dissolved in water and their biological significance.
  • Hard and soft water: Temporary and permanent hardness and methods of softeninghard water.
  • Treatment of water for town supply.
  • Water of crystallization, efflorescence, deliquescence and hygroscopy. Examples of the substances exhibiting these properties and their uses.

 

7. Solubility

Topics:

  • Unsaturated, saturated and supersaturated solutions. Solubility curves and simple deductions from them, (solubility defined in terms of mole per dm3) and simple calculations.
  • Solvents for fats, oil and paints and the use of such solvents for the removal of stains.
  • False solution (Suspensions and colloids): Properties and examples. Harmattan haze and water paints as examples of suspensions and fog, milk, aerosol spray, emulsion paints and rubber solution as examples of colloids.

 

8. Environmental Pollution

Topics: 

  • Sources and effects of pollutants.
  • Air pollution: Examples of air pollutants such as H2S, CO, SO2, oxides of nitrogen, chlorofluorocarbons and dust.
  • Water pollution Sewage and oil pollution should be known.
  • Soil pollution: Oil spillage, Biodegradable and non-biodegradable pollutants.

 

9. Acids, bases and salts

Topics:

  • General characteristics and properties of acids, bases and salts. Acids/base indicators, basicity of acids; normal, acidic, basic and double salts. An acid defined as a substance whose aqueous solution furnishes H3O+ions or as a proton donor. Ethanoic, citric and tartaric acids as examples of naturally occurring organic acids, alums as examples of double salts, preparation of salts by neutralization, precipitation and action of acids on metals. Oxides and trioxocarbonate (IV) salts
  • Qualitative comparison of the conductances of molar solutions of strong and weak acids and bases, relationship between conductance and amount of ions present.
  • ph and poh scale; Simple calculations
  • Acid/base titrations.
  • Hydrolysis of salts: Principle Simple examples such as NH4Cl, alcl3, Na2CO3 and CH3COONa

 

10. Oxidation and reduction

Topics: 

  • Oxidation in terms of the addition of oxygen or removal of hydrogen.
  • Reduction as removal of oxygen or addition of hydrogen.
  • Oxidation and reduction in terms of electron transfer.
  • Use of oxidation numbers. Oxidation and reduction treated as change in oxidation number and use of oxidation numbers in balancing simple equations.
  • IUPAC nomenclature of inorganic compounds using oxidation number.
  • Tests for oxidizing and reducing agents.

 

11. Electrolysis

Topics:

  • Electrolytes and non-electrolytes. Faraday’s laws of electrolysis.

(i) Electrolysis of dilute H2SO4, aqueous cuso4, cuc12 solution, dilute and concentrated nac1 solutions and fused nac1
(ii) Factors affecting discharge of ions at the electrodes.

  • Uses of electrolysis: Purification of metals e.g. Copper and production of elements and compounds (Al, Na, O2, Cl2 and naoh).
  • Electrochemical cells: Redox series (K, Ca, Na, Mg, Al, Zn, Fe, Sn, Pb, H, Cu, Hg, Ag, Au,) half-cell reactions and electrode potentials. (Simple calculations only).
  • Corrosion as an electrolytic process, cathodic protection of metals, painting, electroplating and coating with grease or oil as ways of preventing iron from corrosion.

 

12. Energy changes

Topics:

  • Energy changes ∆H accompanying physical and chemical changes: dissolution of substances in/or reaction with water e.g. Na, naoh, K, NH4Cl. Endothermic +∆H and exothermic -∆H reactions.
  • Entropy as an order-disorder phenomenon: simple illustrations like mixing of gases and dissolution of salts.
  • Spontaneity of reactions: ∆G = 0 as a criterion for equilibrium, ∆G greater or less than zero as a criterion for non-spontaneity or spontaneity respectively.

 

13. Rates of Chemical Reaction

Topics:

  • Elementary treatment of the following factors which can change the rate of a chemical reaction:

(i) Temperature e.g. The reaction between hcl and Na2S2O3 or Mg and hcl
(ii) Concentration e.g. The reaction between hcl and Na2S2O3, hcl and marble and the iodine clock reaction, for gaseous systems, pressure may be used as concentration term.
(iii) Surface area e.g. The reaction between marble and hcl with
marble in
(i) powdered form
(ii) lumps of the same mass.
(iv) Catalyst e.g. The decomposition of H2O2 or kclo3 in the presence or absence of Mno2

  • Reaction rate curves.
  • Activation energy Qualitative treatment of Arrhenius’ law and the collision theory, effect of light on some reactions. E.g. Halogenation of alkanes

 

14. Chemical equilibra

Topics:

  • Reversible reactions and factors governing the equilibrium position. Dynamic equilibrium. Le Chatelier’s principle and equilibrium constant. Simple examples to include action of steam on iron and N2O4 2NO2. No calculation will be required.

 

15. Non-metals and their compounds

Topics: 

  • Hydrogen: commercial production from water gas and cracking of petroleum fractions, laboratory preparation, properties, uses and test for hydrogen.
  • Halogens: Chlorine as a representative element of the halogen. Laboratory preparation, industrial preparation by electrolysis, properties and uses, e.g. Water sterilization, bleaching, manufacture of hcl, plastics and insecticides. Hydrogen chloride and Hydrochloric acid: Preparation and properties. Chlorides and test for chlorides.
  • Oxygen and Sulphur

(i) Oxygen: Laboratory preparation, properties and uses. Commercial production from liquid air. Oxides: Acidic,basic, amphoteric and neutral, trioxygen (ozone) as an allotrope and the importance of ozone in the atmosphere.
(ii) Sulphur: Uses and allotropes: preparation of allotropes is not expected . Preparation, properties and uses of sulphur(IV) oxide, the reaction of SO2 with alkalis. Trioxosulphate (IV) acid and its salts, the effect of acids on salts of trioxosulphate(IV), Tetraoxosulphate(VI) acid: Commercial preparation (contact process only), properties as a dilute acid, an oxidizing and a dehydrating agent and uses. Test for SO42-. Hydrogen sulphide: Preparation and properties as a weak acid, reducing agent and precipitating agent. Test for S2-

  • Nitrogen:

(i) Laboratory preparation
(ii) Production from liquid air
(iii) Ammonia: Laboratory and industrial preparations (Haber Process only), properties and uses, ammonium salts and their uses, oxidation of ammonia to nitrogen (IV) oxide and trioxonitrate (V) acid. Test for NH4+
(iv) Trioxonitrate (V) acid: Laboratory preparation from ammonia; properties and uses. Trioxonitrate (V) salt- action of heat and uses. Test for NO3-
(v) Oxides of nitrogen: Properties. The nitrogen cycle.

  • Carbon:

(i) Allotropes: Uses and properties
(ii) Carbon(IV) oxide- Laboratory preparation, properties and uses. Action of heat on trioxocarbonate (IV) salts and test for CO32-
(iii) Carbon(II) oxide: Laboratory preparation, properties including its effect on blood; sources of carbon (II) oxide to include charcoal, fire and exhaust fumes.
(iv) Coal: Different types, products obtained from destructive distillation of wood and coal.
(v) Coke: Gasification and uses. Manufacture of synthetic gas and uses.

16. Metals and their compounds

Topics:

  • General properties of metals
  • Alkali metals e.g. Sodium

(i) Sodium hydroxide:- Production by electrolysis of brine, its action on aluminium, zinc and lead ions. Uses including precipitation of
metallic hydroxides.
(ii) Sodium trioxocarbonate (IV) and sodium hydrogen trioxocarbonate (IV): Production by Solvay process, properties and uses, e.g. Na2CO3 in the manufacture of glass.
(iii) Sodium chloride: its occurrence in sea water and uses, the economic importance of sea water and the recovery of sodium chloride.

  • Alkaline-earth metals, e.g. Calcium; calcium oxide, calcium hydroxide and calcium trioxocarbonate (IV); Properties and uses. Preparation of calcium oxide from sea shells, the chemical composition of cement and the setting of mortar. Test for Ca2+.
  • Aluminium Purification of bauxite, electrolytic extraction, properties and uses of aluminium and its compounds. Test for A13+
  • Tin Extraction from its ores. Properties and uses.
  • Metals of the first transition series. Characteristic properties:

(i) electron configuration
(ii) oxidation states
(iii) complex ion formation
(iv) formation of coloured ions
(v) catalysis

  • Iron Extraction from sulphide and oxide ores, properties and uses, different forms of iron and their properties and advantages of steel over iron. Test for Fe2+ and Fe3+
  • Copper Extraction from sulphide and oxide ores, properties and uses of copper. Preparation and uses of copper( II ) tetraoxosulphate(VI). Test for Cu2+
  • Alloy Steel, stainless steel, brass, bronze, type- metal, duralumin, soft solder, permallory and alnico (constituents and uses only).

 

17. Organic Compounds

Topics:

An introduction to the tetravalency of carbon, the general formula, IUPAC nomenclature and the determination of
empirical formula of each class of the organic compounds mentioned below.

  • Aliphatic hydrocarbons

(i) Alkanes Homologous series in relation to physical properties, substitution reaction and a few examples and uses of halogenated products. Isomerism: structural only (examples on isomerism should not go beyond six carbon atoms). Petroleum: composition, fractional distillation and major products; cracking and reforming, Petrochemicals – starting materials of organic syntheses, quality of petrol and meaning of octane number.
(ii) Alkenes Isomerism: structural and geometric isomerism, additional and polymerization reactions, polythene and synthetic rubber as examples of products of polymerization and its use in vulcanization.
(iii) Alkynes Ethyne – production from action of water on carbides, simple reactions and properties of ethyne.

  • Aromatic hydrocarbons e.g. Benzene – structure, properties and uses.
  • Alkanols Primary, secondary, tertiary – production of ethanol by fermentation and from petroleum by-products. Local examples of fermentation and distillation, e.g. Gin from palm wine and other local sources and glycerol as a polyhydric alkanol. Reactions of OH group – oxidation as a distinguishing test among primary, secondary and tertiary alkanols (Lucas test).
  • Alkanals and alkanones. Chemical test to distinguish between alkanals and alkanones.
  • Alkanoic acids. Chemical reactions; neutralization and esterification, ethanedioic (oxalic) acid as an example of a dicarboxylic acid and benzene carboxylic acid as an
    example of an aromatic acid.
  • Alkanoates Formation from alkanoic acids and alkanols – fats and oils as alkanoates. Saponification: Production of soap and margarine from alkanoates and distinction between detergents and soaps.
  • Amines (Alkanamines) Primary, Secondary, and tertiary
  • Carbohydrates

Classification – mono-, di- and polysaccharides; composition, chemical tests for simple sugars and reaction with concentrated tetraoxosulphate (VI) acid. Hydrolysis of complex sugars e.g. Cellulose from cotton and starch from cassava, the uses of sugar and starch in the production of alcoholic beverages, pharmaceuticals and textiles.

  • Proteins: Primary structures, hydrolysis and tests (Ninhydrin, Biuret, Millon’s and xanthoproteic)
    Enzymes and their functions.
  • Polymers: Natural and synthetic rubber; addition and condensation polymerization. – Methods of preparation, examples and uses. Thermoplastic and thermosetting plastics.

 

18. Chemistry and Industry

Topics:

  • Chemical industries: Types, raw materials and relevancies; Biotechnology.

 

CLICK HERE TO DOWNLOAD JAMB SYLLABUS FOR CHEMISTRY PDF

  • Ababio, O.Y. (2005). New School Chemistry for Senior Secondary Schools, (Third Edition),
    Onitsha: Africana FIRST Publishers Limited
  • Bajah, S.T. Teibo, B.O., Onwu, G and Obikwere, A. (1999). Senior Secondary Chemistry,
    Book 1, Lagos: Longman
  • Bajah, S.T., Teibo, B.O., Onwu, G and Obikwere, A. (2000). Senior Secondary Chemistry,
    Books 2 and 3, Lagos: Longman
  • Ohia, G.N.C., Adewoyin, F.A. and Akpan, B.B. (1997). Exam Focus Chemistry for WASSCE
    & JME: Ibadan: University Press Plc
  • STAN (1987). Chemistry for Senior Secondary Schools, Ibadan: Heinemann
  • Sylvester: O.O. (2004). A Comprehensive Practical Chemistry for Senior Secondary Schools,
    Ibadan: Evans
  • Uche, I.O., Adenuga, I.J. and Iwuagwu, S.L. (2003). Countdown to WASSCE/SSCE, NECO, JME Chemistry,
    Ibadan: Evans
  • Wisdomline Pass at Once JAMB.

 

Why You Should Use JAMB Syllabus For Chemistry To Prepare For JAMB

1. JAMB syllabus help you to know what you need to cover.

2. From JAMB syllabus, you can predict possible questions.

3. JAMB examiners will not set questions out of the syllabus.

4. Together with JAMB past questions, JAMB syllabus is the 100% sure JAMB expo you need.

 

  • Official JAMB chemistry syllabus 2022/2023
  • JAMB chemistry syllabus 2022/2023
  • JAMB syllabus for chemistry 2022 pdf download free
  • JAMB chemistry syllabus 2022 pdf download

That is all for now on the topic JAMB chemistry syllabus 2022 PDF and online. Don’t forget to share the article using the share buttons below.

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like